Jeep 5175762AA Sensor-CAMSHAFT

You can Select Your Vehicle to check if 5175762AA fits your vehicle.

Disconnect the cable from the negative terminal of the battery, then disconnect the CMP sensor electrical connector. Remove the CMP sensor retaining bolts and take out the CMP sensor. Next, remove the screw that attaches the target magnet to the camshaft and then take out the target magnet. When installing the target magnet, ensure that the locating dowels on the back of the magnet are aligned with the locating holes in the end of the camshaft, and tighten the target magnet retaining screw to the specified torque. The installation process is the reverse of removal, making sure to tighten the CMP sensor retaining bolts to the specified torque.

Start by disconnecting the cable from the negative battery terminal. For 3.7L V6 and 4.7L V8 engines, raise the front end of the vehicle and secure it on jackstands. Then, disconnect the electrical connector from the CMP sensor and remove the sensor mounting bolt. For Hemi engines, remove the air filter housing or air intake tube, disconnect the electrical connector, and remove the sensor mounting bolt. For 3.6L V6 engines, remove the air filter housing or air intake tube, and if necessary, the upper intake manifold. Disconnect the electrical connector, unscrew the sensor mounting bolt, and pull the sensor from the valve cover.