Jeep 5183761AD Tie Rod-Outer

You can Select Your Vehicle to check if 5183761AD fits your vehicle.

loosen the wheel lug nuts and raise the vehicle's front. Support it on jack stands, apply the parking brake, and block the rear wheels. Remove the wheel and loosen the jam nut on the tie-rod end, marking its relationship with the threaded portion. Loosen the ball stud nut and use a puller to disconnect the tie-rod end from the steering knuckle arm. Remove the nut and separate the tie-rod end. To install, thread the tie-rod end to the marked position and connect it to the steering knuckle arm. Tighten the ball stud nut and jam nut, install the wheel, lower the vehicle, and tighten the lug nuts. Lastly, check and adjust the front-end alignment if needed.

Start by loosening the wheel lug nuts and raising the front of the vehicle. Securely support it on jackstands and apply the parking brake. Block the rear wheels to prevent rolling. Remove the wheel. Loosen the jam nut on the tie-rod end and mark the relationship between the tie-rod end and the threaded portion. Loosen the nut on the tie-rod end ballstud and use a puller to disconnect the tie-rod end from the steering knuckle arm. Remove the nut and separate the tie-rod end from the steering knuckle.