Jeep 68211213AC TURBOCHGR

You can Select Your Vehicle to check if 68211213AC fits your vehicle.

Disconnect the negative battery cables and drain coolant. Remove air filter housing, hoses, tubes, wiring, and oil supply line. Remove coolant lines and engine-driven fan/shroud (2012+). Raise vehicle and support on jackstands. Remove right inner fender and engine mount. Remove exhaust bracket and V-band clamp. Lower vehicle and remove Grid Heater relay. Remove turbocharger mounting nuts and turbocharger. Clean turbocharger and exhaust manifold. Bolt turbocharger onto exhaust manifold with new gasket. Reinstall oil drain line and coolant lines. Prime center bearing with oil and install supply line. Reverse of removal for remainder of installation. Tighten turbocharger-to-exhaust manifold nuts.

The amount of boost is controlled by a wastegate, which is operated by a spring-loaded actuator assembly.