Make sure this part fits

Jeep 68083202AB Valve-PCV

2012-2013 Jeep 68083202AB

Customer Questions & Expert Answers (13)
Mopar 68083202AB Valve-PCV
  • Part Description
    Valve PCV
  • Replaced By
    68083202AC
  • Manufacturer
    Mopar
Make sure this part fits
$89.08 MSRP: $136.00
You Save: $46.92 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number68083202AB
    Part DescriptionValve PCV
    Item Dimensions2.6 x 2.9 x 3.1 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68083202AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013 Jeep Grand Cherokee6 Cyl 3.6LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2012-2013 Jeep Wrangler6 Cyl 3.6LRubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara 4WD, Unlimited Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68083202AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and replace a PCV valve on Dodge Challenger? Posted by Customer
    A:
    Pull off the engine cover. For V6 engines, remove the hose and unscrew the valve from the intake manifold or right valve cover. On 3.6L engines, the valve is attached to the rear of the right valve cover with screws. Replace the PCV valve seal. For V8 engines, twist and pull the valve from the intake manifold. When buying a new PCV valve, ensure it fits your vehicle and engine size. Compare the old and new valves. Check the rubber O-rings for damage and replace if needed. Securely install the PCV valve.
    Posted by MoparPartsGiant Specialist
    Q:
    What components make up the PCV system for the 2016 Chrysler 200? Posted by Customer
    A:
    The PCV system consists of the PCV valve and two hoses. The fresh air inlet hose connects the air filter housing to the valve cover, while the crankcase ventilation hose connects the rear valve cover to the intake manifold. The PCV valve is located at the valve cover end of the crankcase ventilation hose that connects to the intake manifold.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the Positive Crankcase Ventilation (PCV) system for the 2011 Dodge Avenger? Posted by Customer
    A:
    The PCV system reduces hydrocarbon emissions by scavenging crankcase vapors. It circulates fresh air from the air filter housing through the crankcase, where it mixes with blow-by gases, before being drawn through a PCV valve into the intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar PCV Valve
    Q:
    How do you remove the PCV valve on the 2013 Chrysler 200? Posted by Customer
    A:
    To remove the PCV valve on a 3.6L engine, lift up on the outer edges of the engine cover to disengage the rubber mounts, then remove the cover. Disconnect the camshaft sensor electrical connector and pry the sensor harness retainer off the valve cover stud. Detach the PCV hose and remove the valve mounting screws to take out the valve.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar PCV Valve
    Q:
    What are the symptoms of a plugged or leaking PCV hose for the 2018 Dodge Challenger? Posted by Customer
    A:
    Symptoms of a plugged or leaking PCV hose include rough idling, stalling, or abnormal oil loss, which necessitates repairs or replacements as needed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the PCV valve on the 2009 Dodge Avenger? Posted by Customer
    A:
    To remove the PCV valve on a 3.6L engine, lift up on the outer edges of the engine cover to disengage the rubber mounts, then remove the cover. Disconnect the camshaft sensor electrical connector and pry the sensor harness retainer off the valve cover stud. Detach the PCV hose and remove the valve mounting screws to take out the valve.
    Posted by MoparPartsGiant Specialist
    Q:
    Is cleaning the old valve recommended for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    Cleaning the old valve is not recommended.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar PCV Valve
    Q:
    How do you check the PCV valve for the 1995 Dodge Grand Caravan? Posted by Customer
    A:
    With the engine idling, pull the valve (with the hose attached) from the rubber fitting. On V6 models, detach the hose, unscrew the valve, then reconnect the hose. Place your finger over the valve opening.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect and replace if necessary when removing the PCV valve for the 2016 Jeep Wrangler? Posted by Customer
    A:
    You should inspect the rubber grommet or O-ring for damage and replace it with a new one if necessary.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar PCV Valve
    Q:
    What does the PCV valve do for the 2011 Jeep Grand Cherokee? Posted by Customer
    A:
    The PCV valve regulates gas flow into the intake manifold based on intake vacuum levels.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar PCV Valve
    Q:
    What should be done if there is evidence of engine oil in the throttle body or air filter housing for the 2016 Ram 1500? Posted by Customer
    A:
    If there's evidence of engine oil in the throttle body or air filter housing, have the crankcase pressure tested. Excessive blow-by might indicate other underlying issues that need to be addressed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the PCV valve on a 4.7L engine for the 2018 Ram 1500? Posted by Customer
    A:
    To remove the PCV valve on a 4.7L engine, you need to detach the hose from the PCV valve and use a screwdriver to remove the PCV valve from the valve cover.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar PCV Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68083202AB, the Right Choice

To ensure reliability, purchase Mopar part # 68083202AB Valve-PCV. It is sometimes referred to as Jeep PCV Valve. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee, Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68083202AB Valve-PCV. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly