Make sure this part fits

Mopar 68139389AA ABSORBER Pkg-Suspension

2006-2013 Mopar 68139389AA

Customer Questions & Expert Answers (7)
Mopar 68139389AA ABSORBER Pkg-Suspension
  • Part Description
    Shock ABSORBER Kit Suspension Front
  • Replaces
    68056322AB, 5174302AG, 5174306AG, 5174302AE, 5174302AH, 5174302AF, 68019277AA, 68056266AA, 68019277AC, 5174306AE, 68019284AC, 68019284AA, 68019284AB, 68139380AA, 68019277AB, 5174306AF, 5174302AD
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68139389AA
    Part DescriptionShock ABSORBER Kit Suspension Front
    Other NamesShock, Shock Absorber
    Item Dimensions24.8 x 7.7 x 3.0 inches
    Item Weight5.00 Pounds
    ConditionNew
    Replaces68056322AB, 5174302AG, 5174306AG, 5174302AE, 5174302AH, 5174302AF, 68019277AA, 68056266AA, 68019277AC, 5174306AE, 68019284AC, 68019284AA, 68019284AB, 68139380AA, 68019277AB, 5174306AF, 5174302AD
    ManufacturerMopar
    SKU68139389AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2006-2010 Dodge Ram 25006 Cyl 5.9L Diesel, 6 Cyl 6.7L DieselLaramie Mega CAB 2WD, Laramie Mega Cab 2WD, Mega Cab 2WD, SLT Mega Cab 2WD
    2007-2010 Dodge Ram 35006 Cyl 5.9L Diesel, 6 Cyl 6.7L DieselLaramie Mega Cab 2WD, Mega Cab 2WD, SLT Mega Cab 2WD
    2011-2013 Ram 25006 Cyl 6.7L DieselLaramie Mega Cab 2WD, Longhorn Mega Cab 2WD, SLT Mega Cab 2WD
    2011-2012 Ram 35006 Cyl 6.7L DieselLaramie Mega Cab 2WD, Longhorn Mega Cab 2WD, SLT Mega Cab 2WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68139389AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you check the movement of the steering knuckle-to-control arm ball joint for the 2016 Ram 2500? Posted by Customer
    A:
    Clean the lower end of the steering knuckle and have an assistant grasp the lower edge of the tire and move the wheel in-and-out while checking for movement at the steering knuckle-to-control arm ball joint. If there is any movement, the suspension ball joint(s) must be replaced.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if fluid leakage is observed in the shock absorbers for the 2018 Ram 3500? Posted by Customer
    A:
    If leakage is noted in the shock absorbers, replace them as a set. A light film of fluid is no cause for concern, but significant leakage should be addressed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the old shock absorber for the 2016 Ram 2500? Posted by Customer
    A:
    Remove the nut and bolt that attach the upper end of the shock absorber to the frame, and if necessary, apply penetrating oil to loosen any rust. Then, remove the nut and bolt that attach the lower end of the shock to the axle bracket, again using penetrating oil if needed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you start replacing the rear shock absorbers on a 2018 Ram 3500? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands placed under the frame rails. Support the rear axle with a floor jack placed under the axle tube on the side being worked on.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can the upper mounting nut of the shock absorber be removed for the 2018 Ram 3500? Posted by Customer
    A:
    To remove the upper mounting nut of the shock absorber, you'll need to use a back-up wrench to prevent the shock absorber stem from turning. Then, remove the upper mounting nut after ensuring it's secure.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done underneath the 2013 Ram 2500 during the removal process? Posted by Customer
    A:
    Underneath the vehicle, you should remove the two nuts that attach the lower end of the shock absorber to the lower control arm. This will allow you to pull the shock absorber out from below. Additionally, you should remove the lower grommet and retainer from the stem.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68139389AA, the Right Choice

To ensure reliability, purchase Mopar part # 68139389AA ABSORBER Pkg-Suspension. It is sometimes referred to as Mopar Shock Absorber. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 2500, Ram 3500 models. It fits Ram 2500, 3500.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68139389AA ABSORBER Pkg-Suspension. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly