Make sure this part fits

Mopar 68245509AB ABSORBER Pkg-Suspension

2014-2016 Mopar 68245509AB

Customer Questions & Expert Answers (7)
Mopar 68245509AB ABSORBER Pkg-Suspension
  • Part Description
    Shock ABSORBER Kit Suspension Front
  • Replaced By
    68245509AE
  • Manufacturer
    Mopar
Make sure this part fits
$207.95 MSRP: $310.00
You Save: $102.05 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68245509AB
    Part DescriptionShock ABSORBER Kit Suspension Front
    Item Dimensions30.2 x 6.2 x 5.1 inches
    Item Weight7.60 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68245509AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2015-2016 Ram 25006 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 6.4LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD
    2014-2016 Ram 35006 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 6.4LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68245509AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you check the movement of the steering knuckle-to-control arm ball joint for the 2016 Ram 3500? Posted by Customer
    A:
    Clean the lower end of the steering knuckle and have an assistant grasp the lower edge of the tire and move the wheel in-and-out while checking for movement at the steering knuckle-to-control arm ball joint. If there is any movement, the suspension ball joint(s) must be replaced.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you check for play in the steering system components for the 2011 Ram 2500? Posted by Customer
    A:
    Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done underneath the 2011 Ram 3500 during the removal process? Posted by Customer
    A:
    Underneath the vehicle, you should remove the two nuts that attach the lower end of the shock absorber to the lower control arm. This will allow you to pull the shock absorber out from below. Additionally, you should remove the lower grommet and retainer from the stem.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Are there any precautions to take during shock absorber installation for the 2013 Ram 2500? Posted by Customer
    A:
    Yes, during shock absorber installation, it's recommended to apply thread locking compound to the shock absorber stud before installing the upper mounting nut. This helps ensure a secure fit. Moreover, ensure that you properly tighten the lower mounting nuts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the old shock absorber for the 2015 Ram 2500? Posted by Customer
    A:
    Remove the nut and bolt that attach the upper end of the shock absorber to the frame, and if necessary, apply penetrating oil to loosen any rust. Then, remove the nut and bolt that attach the lower end of the shock to the axle bracket, again using penetrating oil if needed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you start replacing the rear shock absorbers on a 2013 Ram 3500? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands placed under the frame rails. Support the rear axle with a floor jack placed under the axle tube on the side being worked on.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68245509AB, the Right Choice

To ensure reliability, purchase Mopar part # 68245509AB ABSORBER Pkg-Suspension. It is sometimes referred to as Mopar Shock Absorber. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Ram 2500, 3500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68245509AB ABSORBER Pkg-Suspension. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly