Mopar 5085324AB ABSORBER-Suspension

You can Select Your Vehicle to check if 5085324AB fits your vehicle.

Place it in position with the studs extending up through the strut tower. Install the nuts and tighten them to the torque. Attach the strut to the steering knuckle, then insert the strut-to-steering knuckle bolts. If equipped with special camber adjusting bolts, align the marks you made in Step 3. Hold the bolts and tighten the nuts to the torque listed in the Specifications. Attach the ground strap and, if equipped, the ABS sensor harness bracket to the strut and tighten the bolt(s) securely. Install the wheel and lug nuts and lower the vehicle. Tighten the lug nuts to the torque.

You'll need a spring compressor, which is available on a daily rental basis at most auto parts stores or equipment yards.

Lower the vehicle and proceed to check the condition of the ball joints. Inspect the steering gear boots for any cracks and ensure that clamps are secure. If you notice lubricant leaking from the boots, it indicates that the rack seals have failed. In such cases, it's advisable to have the steering gear replaced or overhauled by a professional.

Raise the rear of the vehicle and securely support it on jackstands placed underneath the rear jacking points.