Mopar 5085324AC ABSORBER-Suspension

You can Select Your Vehicle to check if 5085324AC fits your vehicle.

Install the wheels and lug nuts and lower the vehicle. Finally, tighten the lug nuts to the specified torque.

Extend the damper rod and install the rubber bumper. Position the coil spring with the smaller coils going on first and carefully place it onto the damper shaft. Install the rubber bumper and push it all the way down. Install the upper spring seat and dust boot onto the damper shaft. Install the suspension support, aligning the support notch with the clevis bracket on the strut support. Install the nut and tighten it to the specified torque. Loosen the coil spring compressor(s) until the top coil is properly seated against the upper spring seat and suspension support. Relieve all tension from the spring compressor(s) and remove them from the coil spring. Finally, install the strut/spring assembly.

Inspect the strut body for leaking fluid, dents, damage and corrosion. Check the spring for nicks, chips or cracks in the spring coating.

Regular inspections of the steering linkage and suspension components are essential because worn or damaged parts can lead to various issues such as abnormal tire wear, poor ride quality, compromised vehicle handling, and reduced fuel economy. Identifying and addressing problems in these systems can help maintain the vehicle's safety and performance.