Mopar 5105114AA ABSORBER-Suspension

You can Select Your Vehicle to check if 5105114AA fits your vehicle.

Install the wheels and lug nuts and lower the vehicle. Finally, tighten the lug nuts to the specified torque.

Inspect the strut body for leaking fluid, dents, damage and corrosion. Check the spring for nicks, chips or cracks in the spring coating.

Mount the strut clevis bracket portion of the strut assembly in a vise, being careful not to clamp any other portion of the strut assembly. Install the spring compressor on the spring and compress it sufficiently to relieve all pressure from the upper spring seat. While holding the damper shaft from turning, loosen the shaft nut with a socket. Remove the nut and suspension support, inspecting the bearing and rubber portion for any issues. Remove the upper spring seat and dust boot from the damper shaft, as well as the rubber bumper. Carefully lift the compressed spring from the assembly and set it in a safe place, making sure to mark it for reinstallation.