Make sure this part fits

Mopar 52853460AD ABSORBER-Suspension

2010-2012 Mopar 52853460AD

Customer Questions & Expert Answers (7)
Mopar 52853460AD ABSORBER-Suspension
  • Part Description
    Shock ABSORBER Suspension Rear
  • Replaced By
    52853460AF
  • Manufacturer
    Mopar
Make sure this part fits
$125.43 MSRP: $190.00
You Save: $64.57 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number52853460AD
    Part DescriptionShock ABSORBER Suspension Rear
    Item Dimensions32.3 x 6.2 x 3.3 inches
    Item Weight11.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerMopar
    SKU52853460AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010 Dodge Ram 15008 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Quad Cab 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
    2011-2012 Ram 15008 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 52853460AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    Are there any precautions to take during shock absorber installation for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Yes, during shock absorber installation, it's recommended to apply thread locking compound to the shock absorber stud before installing the upper mounting nut. This helps ensure a secure fit. Moreover, ensure that you properly tighten the lower mounting nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you check the shock absorbers for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake. Push down at one corner of the vehicle and release it, noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces. If the vehicle continues to move up-and-down or fails to return to its original position, a worn or weak shock absorber is likely the reason. Repeat this check at each of the three remaining corners of the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you start replacing the rear shock absorbers on a 2010 Dodge Ram 1500? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands placed under the frame rails. Support the rear axle with a floor jack placed under the axle tube on the side being worked on.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the new shock absorber for the 2017 Ram 1500? Posted by Customer
    A:
    Extend the new shock absorber as far as possible and install new rubber grommets into the shock absorber eyes. Finally, install the new shock absorber by reversing the removal process and tightening the shock absorber mounting fasteners.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the potential issues that can arise from worn or damaged suspension and steering linkage components for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Worn or damaged suspension and steering linkage components can result in excessive and abnormal tire wear, poor ride quality and vehicle handling, and reduced fuel economy.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the reinstallation of the shock absorber be carried out for the 2011 Ram 1500? Posted by Customer
    A:
    During the reinstallation of the shock absorber, make sure to follow these steps in reverse order. Ensure that all fasteners are tightened properly to ensure the shock absorber's secure installation.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 52853460AD, the Right Choice

To ensure reliability, purchase Mopar part # 52853460AD ABSORBER-Suspension. It is sometimes referred to as Mopar Shock Absorber. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 1500 models. It fits Ram 1500.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 52853460AD ABSORBER-Suspension. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly