Make sure this part fits

Mopar 68040882AB ABSORBER-Suspension

2009-2011 Mopar 68040882AB

Customer Questions & Expert Answers (7)
Mopar 68040882AB ABSORBER-Suspension
  • Part Description
    Shock ABSORBER Kit Suspension Front
  • Replaced By
    68040882AE
  • Manufacturer
    Mopar
Make sure this part fits
$240.26 MSRP: $358.00
You Save: $117.74 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68040882AB
    Part DescriptionShock ABSORBER Kit Suspension Front
    Item Dimensions28.1 x 5.7 x 5.8 inches
    Item Weight6.60 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68040882AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Dodge Ram 15008 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Quad Cab 4WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
    2011 Ram 15008 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT HEV Plus Crew 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68040882AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What additional steps are involved in removing the shock absorber for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    For 4WD models with a solid front axle, you'll need to remove the shock absorber upper mounting bracket in addition to the other steps. This bracket removal is part of the process.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the old shock absorber for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Remove the nut and bolt that attach the upper end of the shock absorber to the frame, and if necessary, apply penetrating oil to loosen any rust. Then, remove the nut and bolt that attach the lower end of the shock to the axle bracket, again using penetrating oil if needed.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you check the shock absorbers for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake. Push down at one corner of the vehicle and release it, noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces. If the vehicle continues to move up-and-down or fails to return to its original position, a worn or weak shock absorber is likely the reason. Repeat this check at each of the three remaining corners of the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check the movement of the steering knuckle-to-control arm ball joint for the 2011 Ram 1500? Posted by Customer
    A:
    Clean the lower end of the steering knuckle and have an assistant grasp the lower edge of the tire and move the wheel in-and-out while checking for movement at the steering knuckle-to-control arm ball joint. If there is any movement, the suspension ball joint(s) must be replaced.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What additional steps are involved in removing the shock absorber for the 2013 Ram 1500? Posted by Customer
    A:
    For 4WD models with a solid front axle, you'll need to remove the shock absorber upper mounting bracket in addition to the other steps. This bracket removal is part of the process.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you start replacing the rear shock absorbers on a 2016 Ram 1500? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands placed under the frame rails. Support the rear axle with a floor jack placed under the axle tube on the side being worked on.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68040882AB, the Right Choice

To ensure reliability, purchase Mopar part # 68040882AB ABSORBER-Suspension. It is sometimes referred to as Mopar Shock Absorber. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 1500 models. It fits Ram 1500.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68040882AB ABSORBER-Suspension. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly