Mopar R4896805AE ALTERNATR-Engine

You can Select Your Vehicle to check if R4896805AE fits your vehicle.

Start by disconnecting the battery cable from the negative terminal. Remove the drivebelt and raise the front of the vehicle on jackstands. Unsnap the plastic insulator cap from the B+ output terminal and remove the battery cable retaining nut from the B- output terminal. Disconnect the battery cable from the B+ output terminal and the field wire electrical connector from the field terminal. Working underneath the engine, remove the alternator support bracket nut and bolt, and then remove the support bracket. Remove the upper and lower mounting bolts to take out the alternator. Reverse the steps for installation and check the charging voltage.

To replace the alternator in a vehicle with V8 engines: Disconnect the negative battery cable. Remove the drive belt. Raise the vehicle and secure it on jackstands. Unsnap the plastic insulator cap from the B+ output terminal. Remove the battery cable retaining nut from the B+ output terminal and disconnect the battery cable from the B+ output terminal.

Start by disconnecting the battery cable from the negative terminal. Then, remove the drivebelt and disconnect the battery cable from the B+ output terminal and the field wire electrical connector from the field terminal. Remove the upper and lower mounting bolts to take out the alternator. Installation is the reverse of removal, and don't forget to check the charging voltage to ensure the alternator is functioning correctly.