Mopar R6029914AG ALTERNATR-Engine

You can Select Your Vehicle to check if R6029914AG fits your vehicle.

Make sure the new/rebuilt unit looks identical to the old alternator. Look at the terminals - they should be the same in number size and location as the terminals on the old alternator. Finally, look at the identification numbers - they will be stamped into the housing or printed on a tag attached to the housing. Make sure the numbers are the same on both alternators. Many new and remanufactured alternators do not have a pulley installed, so you may have to switch the pulley from the old unit to the new/rebuilt one. When buying an alternator, find out the shop's policy regarding pulleys; some shops will perform this service free of charge.

Start by disconnecting the negative terminal of the battery, then remove the drivebelt. Unsnap the insulator cap from the B+ terminal and remove the mounting nut at the rear of the alternator. Disconnect the battery cable from the alternator.