Mopar RX801338AB ALTERNATR-Engine

You can Select Your Vehicle to check if RX801338AB fits your vehicle.

Disconnect the cable from the negative terminal of the battery. Disconnect the output wire and the field terminals from the alternator. Loosen the tension on the drivebelt, then remove the serpentine drivebelt. Remove the mounting nuts/bolts and separate the alternator from the engine.

Take the old one with you when purchasing a replacement unit. Make sure the new/rebuilt unit looks identical to the old alternator. Look at the terminals - they should be the same in number, size and location as the terminals on the old alternator. Finally, look at the identification numbers - they will be stamped into the housing or printed on a tag attached to the housing. Make sure the numbers are the same on both alternators. Many new/rebuilt alternators do not have a pulley installed, so you may have to switch the pulley from the old unit to the new/rebuilt one. When buying an alternator, find out the shop's policy regarding pulleys; some shops will perform this service free of charge.

Remove one of the alternator mounting bolts to pivot the alternator and access the electrical connectors.