Make sure this part fits

Mopar 52106813AB Bar-Front

2003-2009 Mopar 52106813AB

Customer Questions & Expert Answers (5)
Mopar 52106813AB Bar-Front
  • Part Description
    Bar Front Sway
  • Manufacturer
    Mopar
Make sure this part fits
$362.01 MSRP: $556.00
You Save: $193.99 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number52106813AB
    Part DescriptionBar Front Sway
    Other NamesStabilizer Bar
    Item Dimensions39.4 x 12.1 x 8.5 inches
    Item Weight26.30 Pounds
    ConditionNew
    ManufacturerMopar
    SKU52106813AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2003-2009 Dodge Ram 250010 Cyl 8.0L, 6 Cyl 5.9L Diesel, 6 Cyl 6.7L Diesel, 8 Cyl 5.7LLaramie Mega Cab 4WD, Laramie Quad Cab 4WD, Laramie Regular Cab 4WD, Mega Cab 4WD, SLT Mega Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
    2003-2009 Dodge Ram 350010 Cyl 8.0L, 6 Cyl 5.9L Diesel, 6 Cyl 6.7L Diesel, 8 Cyl 5.7LLaramie Mega Cab 4WD, Laramie Quad Cab 4WD, Laramie Regular Cab 4WD, Mega Cab 4WD, SLT Mega Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 52106813AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to Replace a Front Stabilizer Bar on Dodge Ram 3500? Posted by Customer
    A:
    To begin, raise the vehicle and securely support it on jackstands. Next, remove the nuts from the link bolts and take out the link bolts, ensuring to hold the link with a wrench while unscrewing the sway bar kit link nut. Remember to keep the parts for the left and right sides separate. For conventional units, remove the sway bar kit bracket bolts and the brackets. For disconnecting-type front sway bar kits, disconnect the wiring harness from the disconnection unit, then unbolt the unit and the support brackets. Note that the disconnection unit is a part of the sway bar kit and cannot be replaced separately. If replacing the whole unit, it will need to be programmed to the vehicle by a dealer or qualified shop with a scan tool. Proceed by removing the sway bar kit and the rubber bushings from it. Take the time to inspect all rubber bushings for wear and damage, replacing any that are cracked, torn, or deteriorated. Finally, installation is the reverse of removal, ensuring to tighten all fasteners and the wheel lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    How to Replace a Front Stabilizer Bar on Dodge Ram 2500? Posted by Customer
    A:
    To begin, raise the vehicle and securely support it on jackstands. Next, remove the nuts from the link bolts and take out the link bolts, ensuring to hold the link with a wrench while unscrewing the sway bar kit link nut. Remember to keep the parts for the left and right sides separate. For conventional units, remove the sway bar kit bracket bolts and the brackets. For disconnecting-type front sway bar kits, disconnect the wiring harness from the disconnection unit, then unbolt the unit and the support brackets. Note that the disconnection unit is a part of the sway bar kit and cannot be replaced separately. If replacing the whole unit, it will need to be programmed to the vehicle by a dealer or qualified shop with a scan tool. Proceed by removing the sway bar kit and the rubber bushings from it. Take the time to inspect all rubber bushings for wear and damage, replacing any that are cracked, torn, or deteriorated. Finally, installation is the reverse of removal, ensuring to tighten all fasteners and the wheel lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect for for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    It is important to inspect the bushings for any signs of wear or damage and replace them as required.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect for for the 2010 Dodge Ram 2500? Posted by Customer
    A:
    It is important to inspect the bushings for any signs of wear or damage and replace them as required.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 52106813AB, the Right Choice

To ensure reliability, purchase Mopar part # 52106813AB Bar-Front. It is sometimes referred to as Mopar Sway Bar Kit. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 2500, Ram 3500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 52106813AB Bar-Front. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly