Mopar BB065800AA Battery-Storage

You can Select Your Vehicle to check if BB065800AA fits your vehicle.

Always disconnect the negative cable first. Check the indicator eye on the top of the battery. If maintenance-free and eye is clear, replace. Add distilled water if removable cell caps. Check alternator charging voltage and replace if necessary. Perform open-voltage and load tests. If weak or defective, replace. Disconnect terminals, remove hold-down bolt and clamp, and lift out battery. Inspect and clean battery tray and surrounding areas. Ensure new battery is identical to original. Installation is reverse of removal.

When handling the electrolyte, precautions should be taken to avoid contact with eyes, skin, and clothes. It contains poisonous and corrosive sulfuric acid.

If corrosion is evident, the battery should be removed for cleaning by loosening the cable clamp bolts and disconnecting the hold-down clamp bolt and nut. The cable clamps should be thoroughly cleaned with a battery brush or terminal cleaner and a solution of warm water and baking soda. The terminals and top of the battery case should be washed with the same solution, being careful not to let it get into the battery. The battery posts should be cleaned with a terminal cleaner if extensively corroded. All cleaned areas should be thoroughly washed with plain water.

Use a battery load tester.