Mopar 5072833AA Booster-Power Brake

You can Select Your Vehicle to check if 5072833AA fits your vehicle.

Disconnect the cable from the negative battery terminal. Remove the air filter housing. Unbolt the underhood fuse/relay box and position it out of the way. Disconnect the vacuum hoses from the power brake booster vacuum fitting. Label and disconnect the vacuum hoses and electrical connector from the EGR valve transducer. Remove the EGR valve transducer. Remove the master cylinder from the vehicle. Working inside the vehicle under the dash, disconnect the power brake push rod from the top of the brake pedal by prying off the retaining clip. Remove the nuts attaching the booster to the firewall. Working inside the engine compartment, carefully withdraw the power brake booster unit from the firewall and out of the engine compartment. On vehicles with anti-lock brakes or with turbocharged engines, it will be necessary to remove the Integrated Power Module and bracket before removing the booster.