Make sure this part fits

Mopar 68090631AA Boot Pkg-Half Shaft

2012-2021 Mopar 68090631AA

Customer Questions & Expert Answers (3)
Mopar 68090631AA Boot Pkg-Half Shaft
  • Part Description
    Boot Kit Half Shaft Outer
  • Manufacturer
    Mopar
Make sure this part fits
$63.07 MSRP: $94.60
You Save: $31.53 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68090631AA
    Part DescriptionBoot Kit Half Shaft Outer
    Other NamesBoot, Boot Kit
    Item Dimensions7.1 x 6.0 x 6.1 inches
    Item Weight1.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68090631AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2012-2019 Ram 15006 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, Rebel 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Reg Cab 4WD, SLT Regular Cab 4WD, Sport Crew Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Reg Cab 4WD, Sport Regular Cab 4WD, SSV Crew Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Reg Cab 4WD, ST Regular Cab 4WD, Tradesman Crew Cab 4WD, Tradesman Quad Cab 4WD, Tradesman Reg Cab 4WD
    2021 Ram 1500 Classic6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68090631AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to disassemble and assemble CV joints and CV Boot on Ram 1500? Posted by Customer
    A:
    When dealing with potentially worn CV joints, it's wise to consider alternatives before diving into an overhaul, particularly if wear is due to torn CV Boot. Check the availability and cost of replacement parts and complete rebuilt drive axles on an exchange basis before proceeding with the job. To disassemble the inner CV joint, securely mount the drive axle in a bench vise with wood blocks for protection and remove the boot retaining clamps, sliding the inner boot back. Then, pull off the inner CV joint housing from the shaft and tripod, remove the snap-ring from the shaft using snap-ring pliers, mark the shaft and tripod, and take off the tripod. Afterward, remove the boot, clean the housing and tripod with solvent, and thoroughly inspect them for wear or damage; if found, replace the entire joint. For assembly, apply CV joint grease to the tripod and interior of the housing, insert the shaft and tripod into the housing after positioning the boot correctly, and secure the boot clamps. To disassemble the outer CV joint, mount the axleshaft in a vise with wood blocks, remove the boot clamps and slide the boot back. Wipe away the grease and expand the snap-ring retaining the outer joint to the shaft with snap-ring pliers to remove the joint. After sliding off the boot from the drive axle, inspect the axle spline area for damage and corrosion, clean the outer CV joint bearing assembly, and mark the relative positions of the bearing cage, inner race, and housing. To disassemble the bearing assembly from the housing, tilt it vertically and align opposing cage windows between the ball grooves. Turn the inner race 90 degrees to the cage, align a spherical land with an elongated cage window, and raise the land into the window to separate the two components. Clean all parts with solvent and inspect for damage, corrosion, wear, or cracks; if unserviceable, replace the entire CV joint assembly with a new one. For assembly, apply a thin film of oil to all CV joint components and align the marks when installing the inner race in the cage and the assembly in the housing. Ensure the large counter bore of the inner race faces out, and fill the joint with grease through the splined hole while inserting wooden dowels to force the grease in. Slide the inner clamp and boot over the drive axle, place the CV joint housing in position, align the splines, and push it into place. Secure it by attempting to pull it from the shaft, ensure the boot is undistorted, and then tighten the clamps.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be visually inspected in the steering and suspension components for the 2012 Ram 1500? Posted by Customer
    A:
    Visually inspect the steering and suspension components for damage and distortion, including seals, boots, bushings, and leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68090631AA, the Right Choice

To ensure reliability, purchase Mopar part # 68090631AA Boot Pkg-Half Shaft. It is sometimes referred to as Mopar CV Boot. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Ram 1500, 1500 Classic models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68090631AA Boot Pkg-Half Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly