Mopar 5058070AC Bottle-COOLANT Recovery

You can Select Your Vehicle to check if 5058070AC fits your vehicle.

For non-turbocharged models, the vent hose clip should be removed from the stud on the firewall. The MAP sensor connector should be disconnected. The power steering fluid reservoir mounting bolts should be removed and the reservoir should be positioned out of the way. The power steering lines should not be disconnected. The coolant reservoir mounting fasteners should be removed and the reservoir should be lifted from the engine compartment. The reservoir should be cleaned out with soapy water and a brush to remove any deposits inside. The reservoir should be inspected carefully for cracks and replaced if any are found. Installation is the reverse of removal.