Mopar 68211076AC Transmission Gearshift Control Cable

You can Select Your Vehicle to check if 68211076AC fits your vehicle.

To adjust the shift cable, place the shift lever in the PARK position and raise the vehicle securely on jackstands. Verify that the manual shift lever is in the PARK position by checking the park lock pawl inside the transmission. If the driveshaft does not rotate, the transmission is correctly engaged in PARK. Disengage the locking clip on the cable end, move the end of the cable in or out as required to snap it over the stud on the shift lever, and snap the locking clip into place. Lower the vehicle and replace any trim panels that were removed. Ensure the engine starts with the parking brake applied.