Mopar 5057191AF Column-Steering

You can Select Your Vehicle to check if 5057191AF fits your vehicle.

Park the vehicle with the wheels pointing straight ahead. Extend the column all the way out. Disconnect the cable(s) from the negative battery terminal(s). Wait at least two minutes before proceeding. On models equipped with electric telescoping columns, place the column in the mid-tilt position. Remove the steering wheel, then turn the ignition key to the LOCK position to prevent the steering shaft from turning. If this is not done, the airbag clockspring could be damaged. Loosen one of the clockspring mounting fasteners to keep the clockspring centered. Remove the knee bolster and reinforcement panel underneath it. Remove the Steering Column Control Module.