Mopar 4861705AA Air Intake-Air Duct

You can Select Your Vehicle to check if 4861705AA fits your vehicle.

For 2.7L and 3.5L V6 models, disconnect the IAT sensor and loosen the hose clamp screws to remove the air intake Air Duct. Inspect and replace if needed. Disconnect the air intake Air Duct from the air filter box and remove the PCV fresh air inlet hose. Lift the air filter box straight up and inspect the rubber insulators. For the 5.7L V8 engine, remove the engine cover, disconnect the IAT sensor, and remove the air intake Air Duct. Disconnect the air intake Air Duct from the air filter box and remove the PCV fresh air inlet hose. To remove the air resonator box, disconnect the air filter box, remove the retaining bolt, and pull out the locator pins.

Follow similar steps to remove the engine cover, disconnect the electrical connector from the IAT sensor, and remove the air intake duct. Inspect the duct for damage and replace if needed.

Disconnect the electrical connector from the Intake Air Temperature (IAT) sensor and loosen the hose clamp screws to remove the air intake duct. Inspect it for damage and replace if necessary.