Mopar 5014480AC Front Bumper Cover

You can Select Your Vehicle to check if 5014480AC fits your vehicle.

Remove the radiator grille. Disconnect any wiring or other components that would interfere with front bumper cover removal. Have an assistant support the bumper cover as the bolts and nuts are removed. Remove the front bolts and side screws and partially remove the front bumper cover, including the lower front bumper cover bolts. Remove the clips and disconnect the side marker lights from the bumper cover. Remove the nuts on the back and the bolts on each side to detach the front bumper reinforcement, allowing the bumper to be removed. Installation is the reverse of removal. Open the trunk lid and disconnect any wiring or other components that would interfere with bumper cover removal. Remove the rear fenderwell splash shields by detaching the retainers and screws. Remove the rear license platelight assembly. Have an assistant support the bumper cover as the fasteners are removed. Remove the fasteners to detach the rear bumper cover, including those along the top, lower fasteners, and nuts along each side accessible from inside the trunk after pulling back the carpet. Remove the nuts and bolts to detach the rear bumper reinforcement. Installation is the reverse of removal.