Mopar 5062017AA Flywheel

You can Select Your Vehicle to check if 5062017AA fits your vehicle.

To remove the transaxle assembly, first raise the vehicle and support it securely on jackstands. If equipped with a manual transaxle, take out the pressure plate and clutch disc, using this opportunity to check or replace the clutch components and pilot bearing. Before removing the flywheel/driveplate, mark its position relative to the crankshaft to ensure correct alignment during reinstallation. Next, remove the bolts securing the flywheel/driveplate to the crankshaft; a tool to hold it in place can be found at most auto parts stores, or a screwdriver can be wedged in the ring gear teeth to prevent movement. Carefully take off the flywheel/driveplate, supporting it while removing the last bolt, and clean it to eliminate grease and oil. Inspect the mating surfaces of the flywheel/driveplate and crankshaft, replacing the crankshaft rear main seal if it is leaking before reinstalling. For installation, position the flywheel/driveplate against the crankshaft, aligning the match marks, and apply thread locking compound to the bolt threads before tightening them while holding the flywheel/driveplate in place. The rest of the installation follows the reverse order of removal.