Make sure this part fits

Mopar 4667088AF Head-Cylinder

2003 Mopar 4667088AF

Customer Questions & Expert Answers (3)
Mopar 4667088AF Head-Cylinder
  • Part Description
    Head Cylinder
  • Replaced By
    RL170051AA
  • Manufacturer
    Mopar
Make sure this part fits
$217.47 MSRP: $254.00
You Save: $36.53 (15%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4667088AF
    Part DescriptionHead Cylinder
    Item Dimensions28.1 x 10.2 x 8.7 inches
    Item Weight33.70 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4667088AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2003 Chrysler PT Cruiser4 Cyl 2.4LGT
    2003 Chrysler SebringGTC Convertible, Limited Convertible, LX Convertible, LX Sedan, LXi Sedan
    2003 Dodge Neon4 Cyl 2.4LSRT-4
    2003 Dodge StratusR/T, SE, SXT
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4667088AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you properly remove and reinstall a cylinder head on Chrysler PT Cruiser? Posted by Customer
    A:
    Position the number one piston at Top Dead Center, disconnect the cable from the negative battery terminal, drain the cooling system, and remove the spark plugs. Remove the intake manifold, covering the intake ports with duct tape to keep out debris before removing the cylinder head. If necessary, remove the exhaust manifold, noting that on some models it may be easier to remove after the cylinder head. Remove the coil, timing belt, and valve cover. Loosen the cylinder head bolts, 1/4-turn at a time, in reverse of the tightening sequence until they can be removed by hand, and write down the location of the different length bolts for correct reinstallation. Carefully lift the cylinder head straight up and place it on wood blocks to prevent damage to the sealing surfaces, using a wood block and hammer or a prybar if it sticks to the engine block. Exercise caution as the cylinder head is aluminum and can be damaged easily. It is advisable to check the head for warpage even if only the gasket is being replaced. Use special gasket removal solvents to soften and remove old gasket material, ensuring nothing falls into the engine, and clean all threaded fasteners and holes. Place a new gasket and the cylinder head in position on the engine block, applying clean engine oil to the cylinder head bolt threads before installation. Tighten the cylinder head bolts in several stages according to the recommended sequence to the specified torque, using an angle-torque gauge if available, or marking the bolt heads to track the degrees tightened. Reinstall the timing belt and the remaining parts in reverse order of removal, refill and bleed the cooling system, and check all fluid levels. Rotate the crankshaft clockwise slowly by hand through six complete revolutions and recheck the camshaft timing marks. Start the engine and run it until normal operating temperature is reached, checking for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with threaded fasteners and holes for the 2002 Dodge Neon? Posted by Customer
    A:
    Clean all threaded fasteners and ensure the threaded holes in the block are clean and dry.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4667088AF, the Right Choice

To ensure reliability, purchase Mopar part # 4667088AF Head-Cylinder. It is sometimes referred to as Mopar Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler PT Cruiser, Sebring models. It fits Dodge Neon, Stratus.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4667088AF Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly