×
Contact Us Live Chat or 1-888-511-3595
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Mopar 53021609DE Head-Cylinder

2011-2012 Mopar 53021609DE

Customer Questions & Expert Answers (17)
Mopar 53021609DE Head-Cylinder
Mopar 53021609DE Head-Cylinder
  • Part Description
    Head Cylinder Left
  • Replaced By
    53021609DF
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 53021609DE Head-Cylinder is Ref No. 4 in the diagram below

    2011 Ram 3500 Head-Cylinder Diagram for 53021609DE
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number53021609DE
    Part DescriptionHead Cylinder Left
    Item Dimensions23.7 x 12.0 x 9.4 inches
    Item Weight37.30 Pounds
    ConditionNew
    ManufacturerMopar
    SKU53021609DE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2012 Chrysler 3008 Cyl 5.7LC AWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, S V8 AWD, S V8 RWD
    2011-2012 Dodge Challenger8 Cyl 5.7LR/T, SRT8
    2011-2012 Dodge Charger8 Cyl 5.7LPolice RWD, R/T AWD, R/T RWD
    2011-2012 Dodge Durango8 Cyl 5.7LCitadel AWD, Citadel RWD, Crew AWD, Crew RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD
    2011-2012 Jeep Grand Cherokee8 Cyl 5.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2011-2012 Ram 15008 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD
    2011-2012 Ram 25008 Cyl 5.7LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
    2011-2012 Ram 35008 Cyl 5.7LCrew Cab Chassis 4WD, Regular Cab Chassis 4WD

  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 53021609DE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket and cylinder head be positioned for the 2016 Dodge Challenger? Posted by Customer
    A:
    Position the new gasket over the dowel pins, carefully place the cylinder head on the engine block, and install new cylinder head bolts, tightening them in the recommended sequence without applying additional oil to the threads.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked on the block and head mating surfaces for the 2009 Dodge Challenger? Posted by Customer
    A:
    Check for damage, using a file for slight damage and considering machining for excessive damage.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after completing the installation for the 2018 Dodge Challenger? Posted by Customer
    A:
    Complete the installation by reversing the removal steps, adding coolant, and changing the engine oil and filter before starting the engine to check for proper operation and any leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed next for the 2009 Dodge Challenger? Posted by Customer
    A:
    Remove the ignition coils and spark plugs if necessary, then detach the exhaust manifold from the cylinder head being removed.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What components should be removed from the cylinder head for the 2015 Ram 1500? Posted by Customer
    A:
    All additional components attached to the cylinder head, such as coolant fittings, ground straps, cables, hoses, wires, or brackets, should be labeled and removed.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done after removing manifolds and moving the steering pump for the 2011 Ram 1500? Posted by Customer
    A:
    Take off the valve covers, rocker arms, and pushrods.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be disconnected before removing the cylinder head for the 2011 Ram 2500? Posted by Customer
    A:
    Before removing the cylinder head, you should disconnect all wires and vacuum hoses from the cylinder heads. Also, disconnect the ignition coils and spark plugs. Remove the catalytic converter(s), valve covers, crankshaft pulley, and oil pans.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the cylinder head be installed back onto the engine block for the 2016 Ram 3500? Posted by Customer
    A:
    When installing the cylinder head, ensure that the mating surfaces are clean and free of debris. Place the new gasket over the dowel pins and carefully position the cylinder head on the engine block.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps for removing the cylinder head for the 2016 Ram 3500? Posted by Customer
    A:
    Remove the banjo bolt, sealing washers, and the fuel line from the rear of the head, then remove the fuel injectors. Remove the rocker housing and gasket. Loosen the head bolts in the reverse order of the tightening sequence, inserting each removed bolt into a cardboard template to keep track. Carefully pry between the head and block to break the gasket seal, then lift off the cylinder head, either with an assistant or using an engine lifting hoist. Inspect the head and remove any wiring harnesses or ground cables still attached.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the intake manifold and timing components for the 2014 Ram 3500? Posted by Customer
    A:
    After that, raise and securely support the front of the vehicle and unbolt the exhaust pipes from the exhaust manifolds.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What preparations should be made before installing the cylinder head for the 2016 Ram 2500? Posted by Customer
    A:
    Clean the block and head mating surfaces thoroughly, checking for nicks and scratches. Check for warpage using a straightedge and feeler gauge. Clean the injector nozzle seats and the block deck surface, ensuring it's within specified limits. Chase the threads in the head bolt holes with a tap and die, and measure the head bolt lengths. If the bolts are stretched beyond the allowable length, replace them.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be disconnected before removing the cylinder head for the 2013 Ram 1500? Posted by Customer
    A:
    Before removing the cylinder head, you should disconnect all wires and vacuum hoses from the cylinder heads. Also, disconnect the ignition coils and spark plugs. Remove the catalytic converter(s), valve covers, crankshaft pulley, and oil pans.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the intake manifold and timing components for the 2017 Ram 2500? Posted by Customer
    A:
    After that, raise and securely support the front of the vehicle and unbolt the exhaust pipes from the exhaust manifolds.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What components should be removed next for the 2012 Ram 2500? Posted by Customer
    A:
    Remove the intake manifold and the exhaust manifolds from the cylinder heads. Also, remove the steering pump mounting bolts and move the pump aside.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps and checks after cylinder head installation for the 2014 Ram 1500? Posted by Customer
    A:
    Complete the remaining installation steps, including changing the oil and filter, refilling the cooling system, and priming the fuel filter before starting the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What's the procedure for actually removing the cylinder heads for the 2015 Ram 3500? Posted by Customer
    A:
    Lift the heads off the engine using a block of wood or by striking a wood block with a hammer. Store the heads on blocks of wood.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 53021609DE, the Right Choice

To ensure reliability, purchase Mopar part # 53021609DE Head-Cylinder. It is sometimes referred to as Mopar Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Challenger, Charger, Durango. It also fits Jeep Grand Cherokee. This also fits Ram 1500, 2500, 3500.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 53021609DE Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly