Make sure this part fits

Mopar 68280506AC Head-Engine Cylinder

2018 Mopar 68280506AC

Customer Questions & Expert Answers (9)
Mopar 68280506AC Head-Engine Cylinder
  • Part Description
    Head-Engine Cylinder
  • Replaced By
    68280506AD
  • Manufacturer
    Mopar
Make sure this part fits
$1231.75 MSRP: $1495.00
You Save: $263.25 (18%)
Core Charge: $250.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68280506AC
    Part DescriptionHead-Engine Cylinder
    Item Dimensions23.9 x 11.8 x 9.7 inches
    Item Weight35.70 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68280506AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2018 Ram 25008 Cyl 6.4LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD
    2018 Ram 35008 Cyl 6.4LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68280506AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps for removing the cylinder head for the 2017 Ram 3500? Posted by Customer
    A:
    Remove the banjo bolt, sealing washers, and the fuel line from the rear of the head, then remove the fuel injectors. Remove the rocker housing and gasket. Loosen the head bolts in the reverse order of the tightening sequence, inserting each removed bolt into a cardboard template to keep track. Carefully pry between the head and block to break the gasket seal, then lift off the cylinder head, either with an assistant or using an engine lifting hoist. Inspect the head and remove any wiring harnesses or ground cables still attached.
    Posted by MoparPartsGiant Specialist
    Q:
    What components of the cylinder head should be removed for the 2012 Ram 2500? Posted by Customer
    A:
    To remove the cylinder head, you need to take off several components including the timing chain, oil control valves, timing chain tensioner, chain guides, camshafts, rocker arms, and lash adjusters.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps in the installation process for the 2013 Ram 2500? Posted by Customer
    A:
    Finally, the timing chain guides, timing chains, and timing chain sprockets are installed, and the cooling system is refilled, with engine oil and filter changed, before starting the engine to check for oil and coolant leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What initial preparations should be made before attempting to remove the cylinder head for the 2013 Ram 3500? Posted by Customer
    A:
    Before removing the cylinder head, it's important to relieve the fuel system pressure, disconnect the battery, and drain the engine oil and coolant. Additionally, remove the drivebelt, idler pulleys, air filter housing, and intake manifolds.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the head bolts dealt with in preparation for head removal for the 2014 Ram 3500? Posted by Customer
    A:
    Loosen the head bolts in increments and remove them by hand.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps for removing the cylinder head for the 2011 Ram 2500? Posted by Customer
    A:
    Remove the banjo bolt, sealing washers, and the fuel line from the rear of the head, then remove the fuel injectors. Remove the rocker housing and gasket. Loosen the head bolts in the reverse order of the tightening sequence, inserting each removed bolt into a cardboard template to keep track. Carefully pry between the head and block to break the gasket seal, then lift off the cylinder head, either with an assistant or using an engine lifting hoist. Inspect the head and remove any wiring harnesses or ground cables still attached.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the block cylinders be protected during this process for the 2011 Ram 3500? Posted by Customer
    A:
    Block cylinders should be stuffed with clean shop rags to prevent debris from falling in, with a vacuum cleaner used to remove any material that enters.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What are the initial steps to prepare for cylinder head removal for the 2018 Ram 2500? Posted by Customer
    A:
    The initial steps are to relieve the fuel system pressure and disconnect the battery. Drain the cooling system and remove the drivebelt. Take out the PCV and EVAP system components, as well as the cowl.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68280506AC, the Right Choice

To ensure reliability, purchase Mopar part # 68280506AC Head-Engine Cylinder. It is sometimes referred to as Mopar Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Ram 2500, 3500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68280506AC Head-Engine Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly