Mopar R8069384AA Injector-Fuel

You can Select Your Vehicle to check if R8069384AA fits your vehicle.

A leaking fuel injector can cause fuel knock, poor acceleration, low fuel economy, rough idle and misfire. It is recommended to have any checks on diesel fuel injectors done by a dealer service department or qualified diesel repair facility, as injector tests require special high-pressure testing equipment and adapters. Removing and installing the injectors requires expensive special tools, making it not recommended to attempt this job at home. It is generally more cost-effective to have this job done by a dealer service department or diesel specialist.

To change the fuel injectors, remove the upper intake manifold. Unplug any vacuum hoses and electrical connectors that inhibit fuel rail removal. Take out the ignition coils and clean any debris around the injectors. Detach the fuel rail and injectors as a unit. Disconnect the supply line and the electrical connectors from the injectors. Detach the fuel rail and injectors together.

It is important to check for fuel line leaks before proceeding with any checks on diesel fuel injectors.

Remove the engine cover and the air inlet tube. Disconnect the fuel supply line and the electrical connectors from the fuel injectors. Detach the PCV hose and the air make-up hose. Remove the fuel rail mounting bolts and carefully pull and wiggle the injectors to remove them. Remove the fuel rail and injectors as a single assembly.

Remove the upper intake manifold.

It is important to check for fuel line leaks before proceeding with any checks on diesel fuel injectors.

Symptoms may include fuel knock, poor acceleration and performance, low fuel economy, rough engine idle, and engine misfire.

Remove the upper intake manifold.