Mopar 4743569AD Suspension KNUCKLE

You can Select Your Vehicle to check if 4743569AD fits your vehicle.

Reattach the tie-rod end, install a new cotter pin, and proceed with brake disc, pads, and caliper/adapter assembly installation. Reattach the brake hose bracket to the strut and secure the stabilizer bar to the control arms, tightening retainer fasteners. Ensure the CV joint is fully seated in the hub, install the washer and hub nut finger-tight, and proceed to reinstall the wheels, lower the vehicle, and tighten the wheel lug nuts. With an assistant applying the brakes, tighten the hub nut, and complete the assembly by installing the spring washer, nut lock, and a new cotter pin. Finally, verify proper tightness of the steering knuckle and balljoint nuts with the vehicle's weight on the suspension, and have the vehicle's front end alignment checked.