Make sure this part fits

Mopar 4589647AB Front Door Latch

2009-2011 Mopar 4589647AB

Customer Questions & Expert Answers (11)
Mopar 4589647AB Front Door Latch
  • Part Description
    Latch-Front Door
  • Position
    Front
  • Replaces
    4589647AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4589647AB
    Part DescriptionLatch-Front Door
    Other NamesLatch, Lock
    Item Dimensions6.4 x 4.1 x 3.6 inches
    Item Weight1.70 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces4589647AA
    ManufacturerMopar
    SKU4589647AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Dodge Ram 15006 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Crew CAB 2WD, SLT Crew Cab 4WD, SLT HEV Crew Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
    2010 Dodge Ram 25006 Cyl 6.7L Diesel, 8 Cyl 5.7LLaramie Crew CAB 2WD, Laramie Crew Cab 4WD, Laramie Mega CAB 2WD, Laramie Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
    2010 Dodge Ram 35006 Cyl 6.7L DieselLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
    2011 Ram 25006 Cyl 6.7L Diesel, 8 Cyl 5.7LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
    2011 Ram 35006 Cyl 6.7L DieselLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4589647AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What initial steps should be taken before removing the carrier plate for the 2011 Ram 3500? Posted by Customer
    A:
    To remove the carrier plate, start by removing the door trim panel. On crew cab models, also remove the speaker and access panel at the rear of the door. On club cab models, remove the two small access plugs in the upper center of the door.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How should the control rods and access panel be removed for the 2010 Dodge Ram 3500? Posted by Customer
    A:
    Remove the access plate and disconnect the control rods from the outside handle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What steps are involved in detaching the glass and disconnecting wiring for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Detach the clips at the bottom edge of the glass from the window regulator lift plates. Raise the glass to the top and secure it in place using tape strips over the top of the door. Disconnect the main wiring connector inside the door and pull the rubber wiring grommet off of the door jamb. Push the lock tabs in until they're flush using a small screwdriver and gently manipulate the connector out of the hole in the metal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What type of lubricant should be used for the hinges and latch assemblies for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    A few drops of light oil or lock lubricant.
    Posted by MoparPartsGiant Specialist
    Q:
    How often should the hinges and latch assemblies on the doors, hood, and trunk be lubricated for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Once every 3000 miles or every three months.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the outside handle be removed for the 2010 Dodge Ram 2500? Posted by Customer
    A:
    To remove the outside handle, disconnect the cable(s) from the negative battery terminal(s) and remove the carrier plate. Disconnect the two control rods from the handle and remove the door handle bolts from the inside of the door, then remove the handle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the purpose of lubricating the door latch strikers for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    To reduce wear and ensure free movement.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the control rods and access panel be removed for the 2018 Ram 2500? Posted by Customer
    A:
    Remove the access plate and disconnect the control rods from the outside handle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done to the door latch strikers for the 2017 Ram 3500? Posted by Customer
    A:
    They should be lubricated with a thin coat of grease.
    Posted by MoparPartsGiant Specialist
    Q:
    How often should the hinges and latch assemblies on the doors, hood, and trunk be lubricated for the 2015 Ram 2500? Posted by Customer
    A:
    Once every 3000 miles or every three months.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4589647AB, the Right Choice

To ensure reliability, purchase Mopar part # 4589647AB Front Door Latch. It is sometimes referred to as Mopar Door Lock Actuator, Mopar Door Latch Assembly. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 1500, Ram 2500, Ram 3500 models. It fits Ram 2500, 3500.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4589647AB Front Door Latch. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly