Mopar 4626885 Line-Power Steering

You can Select Your Vehicle to check if 4626885 fits your vehicle.

Start by sucking out as much fluid as possible from the reservoir and then raise the vehicle on jackstands. Disconnect the power steering pump hoses, cap the hoses and ports, remove the pump adjustment slot bolt, and the bolt attaching the back of the pump to the mounting bracket. Remove the ABS hydraulic control unit heat shield (if applicable). For four-cylinder models with ABS, remove the wheel speed sensor cable bracket and grommet from the right front wheel well and remove the grommet from the inner fender. Insert a socket wrench to remove the bolt attaching the top of the power steering pump front bracket. Remove the power steering pump drive belt and carefully remove the pump and mounting bracket assembly through the rear of the engine, driveaxle, and front suspension crossmember.