Mopar 68369914AA Link-Steering

You can Select Your Vehicle to check if 68369914AA fits your vehicle.

For removing and installing the drag link, follow these steps:Loosen the wheel lug nuts.Raise the vehicle and securely support it on jackstands.Remove the nut from the drag link ball stud.Use a puller to separate the drag link from the Pitman arm.Loosen the nuts on the tie-rod end ball studs.Disconnect the tie-rod ends from the steering knuckle and drag link with a puller.Installation is the reverse of removal, and ensure all fasteners are tightened.Have the front end alignment checked and adjusted if necessary.

For removing and installing the Pitman arm, follow these steps:Loosen the wheel lug nuts.Raise the vehicle and support it securely on jackstands.Remove the drag link nut from the Pitman arm ball stud.Use a puller to separate the drag link from the steering knuckle arm.Remove the Pitman arm nut and washer.Mark the Pitman arm and steering gear shaft for proper alignment if reusing the same Pitman arm.Installation is the reverse of removal, ensuring all fasteners are tightened.Have the front end alignment checked and adjusted if needed.