Mopar 68036150AG Exhaust Manifold And Catalytic Converter

You can Select Your Vehicle to check if 68036150AG fits your vehicle.

Start by raising the vehicle and securing it on jackstands. If applicable, spray penetrating oil on nuts and bolts for easier loosening. For 2.4L engines (2014 and earlier), remove the oxygen sensor and rear portion of the exhaust system, then detach the converter from the exhaust manifold. For 2.7L engines, remove the front exhaust manifold/catalytic converter by disconnecting oxygen sensors and other components. For rear exhaust manifold/catalytic converter, remove the engine cover, splash shield, crossunder pipe, and oxygen sensors. For 3.5L engines, remove the front and rear exhaust manifold/catalytic converters by disconnecting oxygen sensors and other fasteners. For 3.6L engines, remove the rear catalytic converter by loosening clamps and fasteners, then guide the converter out from the bottom. Before installing the converter, use anti-seize compound on threads and tighten the fasteners securely. Installation is the reverse of removal for all models.

A catalytic converter is an emission control device that reduces pollutants in the exhaust gas stream. There are two types of converters: the conventional oxidation catalyst and the three-way catalyst.