Make sure this part fits

Mopar 68210184AA Exhaust Manifold

2013 Mopar 68210184AA

Customer Questions & Expert Answers (7)
Mopar 68210184AA Exhaust Manifold
  • Part Description
    Manifold-Exhaust
  • Replaced By
    68210184AB
  • Manufacturer
    Mopar
Make sure this part fits
$527.82 MSRP: $778.00
You Save: $250.18 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68210184AA
    Part DescriptionManifold-Exhaust
    Item Dimensions8.8 x 11.3 x 31.3 inches
    Item Weight26.50 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68210184AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013 Ram 25006 Cyl 6.7L DieselLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
    2013 Ram 35006 Cyl 6.7L DieselLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68210184AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be removed before removing the exhaust manifold for the 2012 Ram 2500? Posted by Customer
    A:
    The drive belt, air inlet duct, air filter housing, air conditioning compressor, air conditioning accumulator bracket fastener, heater hoses, starter, and exhaust manifold heat shields.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    Are there any additional steps to complete the installation for the 2012 Ram 3500? Posted by Customer
    A:
    Yes, install the heat shields and apply anti-seize compound to the exhaust manifold-to-exhaust pipe bolts. Tighten the exhaust pipe bolts securely.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps to prepare the 2013 Ram 2500 for exhaust manifold removal? Posted by Customer
    A:
    The initial steps are to disconnect the cable from the negative terminal of the battery and remove the engine cover. If you're removing the right-side manifold, also remove the air filter housing.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be removed before removing the exhaust manifold for the 2011 Ram 3500? Posted by Customer
    A:
    The drive belt, air inlet duct, air filter housing, air conditioning compressor, air conditioning accumulator bracket fastener, heater hoses, starter, and exhaust manifold heat shields.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be noted during installation for the 2013 Ram 3500? Posted by Customer
    A:
    The studs go in the holes for the front two cylinders, and an additional one goes at the lower rear.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be removed in order to remove the turbocharger for the 2013 Ram 2500? Posted by Customer
    A:
    The bolts and brackets retaining the heater line(s) to the exhaust manifold. The bolt retaining the heater pipe(s) to the exhaust manifold. The air filter housing and the air intake hose. The heat shield/noise reduction panel from the exhaust manifold. The EGR cooler. The rear bolt lock plates. The exhaust manifold bolts, exhaust manifold, gaskets, and spacers.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68210184AA, the Right Choice

To ensure reliability, purchase Mopar part # 68210184AA Exhaust Manifold. It is sometimes referred to as Mopar Exhaust Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Ram 2500, 3500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68210184AA Exhaust Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly