Mopar 1AQ521S2AB Outside Rearview Electric Heated Mirror

You can Select Your Vehicle to check if 1AQ521S2AB fits your vehicle.

The electric side-view mirrors are adjustable using a driver's side switch on the left door trim panel, allowing for both up-and-down and left-to-right adjustments. Models with factory-installed dual power mirrors feature a heater grid behind the mirror glass to remove fog, ice, or snow, with the heater grid integrated into each mirror. If a heater grid malfunctions, the mirror requires replacement. The heater grid switches and the heated mirror system indicator light are part of the heater/air conditioning control panel on the dashboard, and if any of these components fail, the heater/air conditioning control assembly should be replaced. The heated mirror relay is located in one of the fuse and relay boxes. The power mirror control switch includes a LEFT-RIGHT selector switch to adjust either side-view mirror. With the ignition in the ACC position, operate the mirror control switch through all functions for both mirrors while listening for the electric motors' sound within the mirrors. If the motors are audible but the mirror glass remains stationary, a defective drive mechanism necessitates mirror replacement. If the mirrors don't operate, check the fuse. If the fuse is intact, proceed to inspect the mirror control switch's voltage, continuity, and ground connections. If issues persist, test the mirror and its wiring for voltage and functionality, replacing the mirror if necessary.

To remove the inside mirror, begin by removing the set screw. Then, slide the mirror up off the support base on the windshield. If you have a model with optional automatic day/night mirrors, disconnect the electrical connector.

To remove the outside mirrors, you need to first remove the door trim panel. Then, pull back the window trim molding. For power mirrors, unplug the electrical connector. After that, remove the fasteners and detach the mirror from the door. Finally, disconnect the electrical connector and remove the mirror mounting fasteners.

The power mirror control switch includes a LEFT-RIGHT selector switch to adjust either side-view mirror.

1.The electric side-view mirrors are adjustable using a driver's side switch on the left door trim panel. 2.They allow for both up-and-down and left-to-right adjustments. 3.Models with factory-installed dual power mirrors feature a heater grid behind the mirror glass to remove fog, ice, or snow.

To install the inside mirror, simply reverse the removal process. Slide the mirror back onto the support base on the windshield and secure it in place. If you have an automatic day/night mirror, reconnect the electrical connector. Don't forget to tighten the set screw to ensure the mirror stays in position.