Mopar V1013984AC Disc Brake Pad Kit-Installation Kit Front

You can Select Your Vehicle to check if V1013984AC fits your vehicle.

Two brake caliper assemblies are used in different models, made by Continental Teves and TRW. They are not interchangeable. Before replacing brake pads, remove some fluid from the master cylinder reservoir. Loosen lug nuts, raise the vehicle, remove wheels, and work on one brake at a time. Clean the caliper, push the piston back, replace brake pads, inspect the caliper and disc, and lubricate guide pins. Repeat for the other wheel, reinstall wheels, lower the vehicle, tighten lug nuts, refill brake fluid, pump the brake pedal, and check fluid level. Test brakes before normal use. The process is similar for rear brakes.

For front brake pad replacement, the steps include cleaning the caliper and surrounding area, pushing the piston back into its bore with a C-clamp, replacing the brake pads, inspecting the caliper for leaks and piston dust boot ruptures, and examining the brake disc. The guide pins should also be cleaned, inspected, and lubricated before reinstalling the caliper.

When servicing disc brakes, it's advisable to use high-quality, nationally-recognized, name-brand parts for optimal performance. This ensures the reliability and durability of the brake components, contributing to safe braking performance.

Remove the caliper attaching bolts and lift the caliper off the adapter. There's no need to disconnect the brake hose. Suspend the caliper out of the way with a piece of wire, making sure it doesn't hang by the hose, stretch, or twist the hose.