Mopar 5015938AA Pump-Washer, Windshield

You can Select Your Vehicle to check if 5015938AA fits your vehicle.

Before attempting to take out the washer reservoir, one is required to pump remaining fluid in the reservoir if any into a suitable receptacle container. Then remove the washer fluid hose by pulling free the washer fluid hose from the inline connector that sits atop the right shock tower. Next, then rapidly disconnect the front bumper assembly and the EVAP carbon canister. Remove the electrical connector that is fixed at the washer pump and separate the washer hose from the reservoir. Subsequently, unscrew the mounting bolts, and in the process of moving the new reservoir along with the pump still mounted on it, one is notified that the windshield washer pump resides in the reservoir. To uninstall the washer pump squeeze its base and with the twisting motion to take it out of the reservoir grommet. To reinstall, reverse the above sequence and if the pump was removed put in a new grommet in its place.