Mopar 5142985AA Water Pump

You can Select Your Vehicle to check if 5142985AA fits your vehicle.

Remove the air conditioning compressor mounting bolts and the accessory drivebelt bracket and timing belt. Remove the water pump bolts and detach it from the engine. Clean the bolt threads and threaded holes, and compare the new pump to the old one to ensure they're identical. Remove any old gasket material and clean the engine and new water pump mating surfaces. Apply ATV sealant to the new water pump O-ring for four-cylinder engines or to the gasket mating surface for 3.7L V6 engines. Attach the pump and O-ring/gasket to the engine and tighten the bolts in a criss-cross pattern. For 4.0L engines, install a new O-ring seal in the water pump groove and carefully mate the pump to the engine. Install the water pump mounting bolts and tighten them. Reinstall all parts that were removed for access to the pump, refill the cooling system, and check for leaks.

Yes, it is possible for a water pump to be bad, even if it doesn't howl or leak water. Sometimes the fins on the back of the impeller can corrode away until the pump is no longer effective. The only way to check for this is to remove the pump for examination.