Mopar 4677755AE Engine Cooling Radiator

You can Select Your Vehicle to check if 4677755AE fits your vehicle.

Disconnect the negative battery cable. Drain the cooling system. Disconnect the overflow hose from the radiator filler neck and remove the reservoir. Loosen the hose clamps and detach the upper and lower coolant hoses from the radiator. If the vehicle has an automatic transaxle, also disconnect and plug the cooler lines. Unplug the electrical connector from the coolant temperature sensor. Remove the radiator mounting bolts and carefully lift out the radiator. Check for leaks and damage. Remove bugs and dirt from the radiator. Installation: Inspect the radiator mounts for deterioration and ensure they are free from dirt or gravel. Install the radiator by properly seating it on the lower mounting insulators before fastening the top brackets. Fill the cooling system with the proper mixture of antifreeze and water. Start the engine and check for leaks. Allow the engine to reach normal operating temperature. Recheck the coolant level and add more if necessary. If working on an automatic transaxle equipped vehicle, check and add fluid as needed.