Make sure this part fits

Mopar 5016846AB Regulator-Fuel Pressure

2001-2003 Mopar 5016846AB

Customer Questions & Expert Answers (8)
Mopar 5016846AB Regulator-Fuel Pressure
  • Part Description
    Regulator Kit Fuel Pressure
  • Replaced By
    5016846AE
  • Manufacturer
    Mopar
Make sure this part fits
$166.94 MSRP: $249.00
You Save: $82.06 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5016846AB
    Part DescriptionRegulator Kit Fuel Pressure
    Item Dimensions6.4 x 6.6 x 3.7 inches
    Item Weight0.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5016846AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2001-2002 Chrysler Prowler6 Cyl 3.5LBase
    2002-2003 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD
    2002-2003 Chrysler Voyager4 Cyl 2.4L, 6 Cyl 3.3LBase, EC, LX
    2002-2003 Dodge Caravan4 Cyl 2.4L, 6 Cyl 3.3LC/V, EC, SE
    2002-2003 Dodge Grand Caravan6 Cyl 3.3L, 6 Cyl 3.8LC/V, EL, ES AWD, ES FWD, EX, SE, Sport AWD, Sport FWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5016846AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove the Fuel Pump/Fuel Pressure Regulator/Fuel Level Sending Unit Assembly on Dodge Caravan? Posted by Customer
    A:
    To replace the fuel pump/fuel pressure regulator/Fuel Level Sensor, start by relieving the system fuel pressure and disconnecting the negative battery terminal. Then, remove the fuel tank and disconnect the fuel delivery line quick-connect fitting and electrical connector from the assembly. Before removing the assembly, make alignment marks on the mounting flange and fuel tank for correct realignment during installation. Loosen the locknut securing the assembly using a brass punch and hammer, and carefully lift it from the fuel tank, being mindful of the float arm and fuel pump inlet strainer. Inspect the inlet strainer and clean or replace if necessary. Finally, reinstall the assembly and tighten the locknut securely.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect and clean or replace if necessary for the 2005 Chrysler Town & Country? Posted by Customer
    A:
    Inspect the inlet strainer and clean or replace if necessary.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the fuel pressure dampener for the 2004 Dodge Grand Caravan? Posted by Customer
    A:
    Using two flare nut or open end wrenches, loosen the return tube nut and install the fuel pressure dampener. Ensure that the fuel return tube nut is securely tightened.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before attempting to remove the regulator for the 2004 Dodge Caravan? Posted by Customer
    A:
    Verify with a dealership parts department that the regulator is removable.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Pressure Regulator
    Q:
    What should be done during installation of the regulator for the 2006 Chrysler Town & Country? Posted by Customer
    A:
    If replacing the regulator, use new O-rings during installation. If reusing the old regulator, replace the upper and lower O-rings with new ones. Do not install a new or used regulator with old O-rings. Coat the new O-rings with clean gasoline during installation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Pressure Regulator
    Q:
    What should be done after installing the new parts for the 1999 Dodge Grand Caravan? Posted by Customer
    A:
    After installing the new parts, the negative battery cable should be reconnected, and a thorough check for fuel leaks should be conducted. Finally, the air cleaner assembly can be installed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you relieve the system fuel pressure for the 1995 Dodge Grand Caravan? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Pressure Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5016846AB, the Right Choice

To ensure reliability, purchase Mopar part # 5016846AB Regulator-Fuel Pressure. It is sometimes referred to as Mopar Fuel Pressure Regulator. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Prowler, Town & Country, Voyager models. It fits Dodge Caravan, Grand Caravan.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5016846AB Regulator-Fuel Pressure. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly