Mopar 5058026AA Resistor-Blower Motor

You can Select Your Vehicle to check if 5058026AA fits your vehicle.

To replace the blower motor, begin by disconnecting the cable from the negative battery terminal. Remove the lower dash panel from the right side of the dashboard below the glovebox. Pull back the carpet and disconnect the blower motor electrical connector. For air-conditioned models, remove the blower motor mounting screws and then remove the blower motor from the blower housing. For non-air-conditioned models, pull down on the release tab and simultaneously rotate the blower motor 1/8-turn counterclockwise to remove the fan from the blower motor assembly. Separate the blower motor from the blower housing. Remove the circlip from the fan and separate the fan from the blower motor frame. Finally, installation is the reverse of removal.