Mopar 5234024 Sensor-Map

You can Select Your Vehicle to check if 5234024 fits your vehicle.

To remove the camshaft reference sensor on 3.3L and 3.8L models, detach the sensor lead, loosen the bolt, and remove the sensor. If reusing, clean the sensor face and replace the spacer and O-ring. To install a new sensor, ensure it has a paper spacer and mount the O-ring. For the charge temperature sensor, unplug the connector, replace the sensor, and secure it with tape. For the coolant sensor, replace the cap, and the sensor, and check the coolant level. For the crankshaft sensor, unplug the connector, loosen the bolt, remove the sensor, and replace the spacer if reusing. For the TPS, check resistance readings, and replace if it is incorrect.

For the throttle body temperature sensor, remove the air cleaner, disconnect throttle cables, remove the accelerator cable bracket, unplug the electrical connector from the sensor, remove the sensor, apply heat transfer compound, install the sensor securely, and reverse the steps for reinstallation.