Make sure this part fits

Mopar 5146803AA Front Drive Shaft

2013-2018 Mopar 5146803AA

Customer Questions & Expert Answers (7)
Mopar 5146803AA Front Drive Shaft
  • Part Description
    Shaft-Drive
  • Replaced By
    5146803AB
  • Manufacturer
    Mopar
Make sure this part fits
$1197.00 MSRP: $1770.00
You Save: $573.00 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5146803AA
    Part DescriptionShaft-Drive
    Item Dimensions42.0 x 7.6 x 5.2 inches
    Item Weight30.40 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5146803AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013-2018 Ram 25006 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4LLaramie Crew Cab 4WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, SLT Crew Cab 4WD, SLT Mega Cab 4WD, SLT Reg Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Reg Cab 4WD, ST Regular Cab 4WD
    2013-2018 Ram 35006 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 6.4LCrew Cab Chassis 4WD, Laramie Crew Cab 4WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 4WD, Reg Cab Chassis 4WD, Regular Cab Chassis 4WD, SLT Crew Cab 4WD, SLT Mega Cab 4WD, SLT Reg Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Reg Cab 4WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5146803AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be avoided when applying the lubricant for the 2012 Ram 2500? Posted by Customer
    A:
    When applying the lubricant, you should avoid applying so much that an excessive amount comes out.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be avoided when applying the lubricant for the 2013 Ram 3500? Posted by Customer
    A:
    When applying the lubricant, you should avoid applying so much that an excessive amount comes out.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the driveshaft for the 2016 Ram 3500? Posted by Customer
    A:
    To install the driveshaft, remove the plastic bag from the transmission or transfer case extension housing and wipe the area clean. Inspect the oil seal and center support bearing. Insert the front end of the driveshaft assembly into the transmission or transfer case extension housing. Raise the rear of the driveshaft into position, checking the alignment marks. If it's a two-piece unit, raise the center support bearing and bolt it loosely into place. Raise the rear end of the rear shaft into position and make sure the alignment marks are in alignment. Remove the tape securing the bearing caps and install the clamps and fasteners.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the driveshaft for the 2016 Ram 2500? Posted by Customer
    A:
    To install the driveshaft, remove the plastic bag from the transmission or transfer case extension housing and wipe the area clean. Inspect the oil seal and center support bearing. Insert the front end of the driveshaft assembly into the transmission or transfer case extension housing. Raise the rear of the driveshaft into position, checking the alignment marks. If it's a two-piece unit, raise the center support bearing and bolt it loosely into place. Raise the rear end of the rear shaft into position and make sure the alignment marks are in alignment. Remove the tape securing the bearing caps and install the clamps and fasteners.
    Posted by MoparPartsGiant Specialist
    Q:
    What is a two-piece driveshaft for the 2016 Ram 2500? Posted by Customer
    A:
    Some models have a two-piece driveshaft, where two drive shafts are connected at a center support bearing.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done when removing and reinstalling the driveshaft for the 2016 Ram 3500? Posted by Customer
    A:
    Whenever the driveshaft is removed, it must be reinstalled in the same relative position to preserve the balance.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5146803AA, the Right Choice

To ensure reliability, purchase Mopar part # 5146803AA Front Drive Shaft. It is sometimes referred to as Mopar Drive Shaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Ram 2500, 3500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5146803AA Front Drive Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly