Make sure this part fits

Mopar 52123162AA Rear Drive Shaft

2007-2009 Mopar 52123162AA

Customer Questions & Expert Answers (7)
Mopar 52123162AA Rear Drive Shaft
  • Part Description
    Shaft Drive Rear 1-Piece
  • Replaced By
    52123162AC
  • Manufacturer
    Mopar
Make sure this part fits
$1390.80 MSRP: $2055.00
You Save: $664.20 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number52123162AA
    Part DescriptionShaft Drive Rear 1-Piece
    Item Dimensions94.3 x 9.6 x 10.0 inches
    Item Weight44.40 Pounds
    ConditionNew
    ManufacturerMopar
    SKU52123162AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2009 Dodge Ram 25006 Cyl 5.9L Diesel, 6 Cyl 6.7L DieselLaramie Mega Cab 4WD, Laramie Quad Cab 4WD, Mega Cab 4WD, SLT Mega Cab 4WD, SLT Quad Cab 4WD, ST Quad Cab 4WD
    2007-2009 Dodge Ram 35006 Cyl 5.9L Diesel, 6 Cyl 6.7L DieselLaramie Mega Cab 4WD, Laramie Quad Cab 4WD, Mega Cab 4WD, SLT Mega Cab 4WD, SLT Quad Cab 4WD, ST Quad Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 52123162AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install a driveshaft on Dodge Ram 2500? Posted by Customer
    A:
    To replace the rear driveshaft, lift the vehicle and mark the driveshaft's position. Remove the bolts securing the driveshaft to the differential pinion flange. Pry the universal joint away and lower the driveshaft. If it's a one-piece, slide it out of the transmission housing; if it's a two-piece, mark the center support bearing's position, unbolt it, and slide the front end out. Cover the extension housing with a plastic bag. To install, remove the bag, clean the area, and inspect the oil seal and center support bearing. Insert the driveshaft into the housing, raise it into position, and check alignment marks. If it's a two-piece, loosely bolt the center support bearing. Raise the rear end, align marks, remove tape from bearing caps, and install clamps and fasteners. For 4WD models, mark the driveshaft's position, remove bolts and straps, make alignment marks, unbolt the flange, and remove the driveshaft.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the problem be verified for the 2010 Dodge Ram 2500? Posted by Customer
    A:
    A road test should verify if the problem is the driveshaft or another vehicle component.
    Posted by MoparPartsGiant Specialist
    Q:
    How is the rear driveshaft connected to the transmission for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    The rear driveshaft employs a splined yoke at the front, which slips into the extension housing of the transmission.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do after removing the driveshaft for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Wrap a plastic bag over the extension housing and hold it in place with a rubber band.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What tool should be used to apply lubricant to the fitting for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    A conventional grease gun should be used to apply sufficient lubricant to the fitting.
    Posted by MoparPartsGiant Specialist
    Q:
    What tool should be used to apply lubricant to the fitting for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    A conventional grease gun should be used to apply sufficient lubricant to the fitting.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 52123162AA, the Right Choice

To ensure reliability, purchase Mopar part # 52123162AA Rear Drive Shaft. It is sometimes referred to as Mopar Drive Shaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 2500, Ram 3500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 52123162AA Rear Drive Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly