Make sure this part fits

Mopar 52067543 Rear Axle Drive Shaft

1990-1993 Mopar 52067543

Customer Questions & Expert Answers (10)
Mopar 52067543 Rear Axle Drive Shaft
  • Part Description
    Shaft, Drive
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number52067543
    Part DescriptionShaft, Drive
    Item Weight18.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKU52067543
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1990-1991 Dodge D1506 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L
    1990-1993 Dodge D2506 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD
    1990-1993 Dodge D3506 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD
    1990-1991 Dodge Ramcharger6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L
    1990-1991 Dodge W1506 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L
    1990-1993 Dodge W2506 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD
    1990-1993 Dodge W3506 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 52067543 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the correct procedure for installing the axleshaft for the 1992 Dodge Ramcharger? Posted by Customer
    A:
    Ensure all parts are clean, then press in the bearing while applying pressure to the outer race only, making sure it goes in squarely.
    Posted by MoparPartsGiant Specialist
    Q:
    What type of gears do both designs of axleshafts employ for the 1986 Dodge Ramcharger? Posted by Customer
    A:
    Both designs employ hypoid gears, with the drive pinion's center line positioned below that of the ring gear.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you prepare the axle housing for reassembly for the 1987 Dodge Ramcharger? Posted by Customer
    A:
    Place a new rubber-coated steel gasket over the axle housing flange studs, followed by the brake assembly, and apply grease to the outer diameter of the bearing outer track to prevent corrosion.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps for the left side installation for the 1993 Dodge Ramcharger? Posted by Customer
    A:
    Repeat the initial steps of raising the vehicle and removing the front wheel and tire, then detach the brake caliper and remove the brake disc and hub assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done for installation for the 1989 Dodge Ramcharger? Posted by Customer
    A:
    Reverse the removal process and ensure all bolts are tightened to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be removed along with the shock absorbers for the 1988 Dodge Ramcharger? Posted by Customer
    A:
    Remove the spring U-bolts and nuts, noting the positions of any tapered shims installed between the rear springs and axle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for full-time 4-wheel-drive axles for the 1988 Dodge Ramcharger? Posted by Customer
    A:
    Push the bearings out of the steering knuckle using a pry bar.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the tapered dowels for the 1989 Dodge Ramcharger? Posted by Customer
    A:
    After installing the tapered dowels, you should install the lock washers and nuts, and then tighten the nuts to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    Where is the Spicer 60 axle found for the 1984 Dodge Ramcharger? Posted by Customer
    A:
    The Spicer 60 axle is found on 3/4 ton vehicles with the optional suspension package and all 1 ton vehicles.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 52067543, the Right Choice

To ensure reliability, purchase Mopar part # 52067543 Rear Axle Drive Shaft. It is sometimes referred to as Mopar Axle Shaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge D150, Ramcharger, W250 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 52067543 Rear Axle Drive Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly