Make sure this part fits

Mopar 5029930AC Speaker

2008-2009 Mopar 5029930AC

Customer Questions & Expert Answers (5)
Mopar 5029930AC Speaker
  • Part Description
    Speaker Instrument Panel
  • Replaced By
    68039662AB
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5029930AC
    Part DescriptionSpeaker Instrument Panel
    Item Dimensions3.3 x 3.3 x 3.3 inches
    Item Weight1.00 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5029930AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2009 Chrysler 3006 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LC AWD, C RWD, C SRT8 RWD, Limited AWD, Limited RWD, LX RWD, Touring AWD, Touring RWD
    2009 Dodge Caliber4 Cyl 2.4LSRT-4
    2008-2009 Dodge Challenger6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LR/T, SE, SRT8
    2008-2009 Dodge Charger6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LBase AWD, Base RWD, R/T AWD, R/T RWD, SRT8 RWD, SXT AWD, SXT RWD
    2008 Dodge Magnum6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LR/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5029930AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install various speakers in a Chrysler 300? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Remove the instrument panel center bezel. Remove the radio mounting screws and pull the radio out of the dash. Disconnect the antenna cable and the electrical connectors from the radio. Installation is the reverse of removal. For door speakers, disconnect the cable from the negative battery terminal. Remove the door trim panel. Remove the four speaker mounting screws. Pull out the speaker and disconnect the electrical connector. Installation is the reverse of removal. For instrument panel speakers, disconnect the cable from the negative battery terminal. Remove the speaker cover. Remove the speaker mounting screws. Pull out the speaker and disconnect the electrical connector. Installation is the reverse of removal. For rear speakers in sedans, disconnect the cable from the negative battery terminal. Remove the upper C-pillar trim and the lower C-pillar trim from both sides, then remove the rear shelf trim. Remove the rear speaker mounting screws. Pull out the speaker and disconnect the electrical connector. Installation is the reverse of removal. For wagons, disconnect the cable from the negative battery terminal. Remove the screw from the speaker bezel, carefully pry the front end of the bezel up, then release the two spring clips holding the bezel to the quarter trim panel. Pass the seat belt through the slit in the bezel, then move the speaker bezel forward to free it from the trim panel. Remove the rear speaker mounting screws. Pull out the speaker and disconnect the electrical connector. Installation is the reverse of removal. For subwoofers, follow the procedure for replacing a rear speaker.
    Posted by MoparPartsGiant Specialist
    Q:
    How is the installation of the door speaker done for the 2018 Dodge Challenger? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove rear speakers in sedans for the 2007 Dodge Charger? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Remove the upper C-pillar trim and the lower C-pillar trim from both sides, then remove the rear shelf trim. Remove the rear speaker mounting screws. Pull out the speaker and disconnect the electrical connector.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove door speakers for the 2007 Dodge Magnum? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Remove the door trim panel. Remove the four speaker mounting screws. Pull out the speaker and disconnect the electrical connector.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5029930AC, the Right Choice

To ensure reliability, purchase Mopar part # 5029930AC Speaker. It is sometimes referred to as Mopar Car Speakers. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Challenger, Charger, Magnum.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5029930AC Speaker. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly