Make sure this part fits

Mopar 4766062AB Front Coil Spring

2007-2010 Mopar 4766062AB

Customer Questions & Expert Answers (7)
Mopar 4766062AB Front Coil Spring
  • Part Description
    Spring-Front Coil
  • Position
    Front
  • Replaced By
    4766062AD
  • Manufacturer
    Mopar
Make sure this part fits
$67.88 MSRP: $102.00
You Save: $34.12 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4766062AB
    Part DescriptionSpring-Front Coil
    Item Dimensions16.4 x 7.3 x 7.4 inches
    Item Weight5.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4766062AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2007-2010 Dodge Avenger4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LExpress, Heat, R/T AWD, R/T FWD, SE, SXT
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4766062AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do if you notice signs of wear on the struts or coil springs for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Before starting any work, it is recommended to explore all options. The strut body cannot be serviced and must be replaced if there is a problem. However, complete strut assemblies with springs may be available on an exchange basis, which can save time and effort. It is important to check the cost and availability of parts before disassembling the vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps for removing the rear wheels and shock absorber/coil spring assembly for the 2010 Dodge Avenger? Posted by Customer
    A:
    Loosen the lug nuts on the rear wheels and raise the vehicle on jackstands. Remove the rear wheels. Remove the rear shock absorber/coil spring assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps after simulating normal ride height for the 2007 Chrysler Sebring? Posted by Customer
    A:
    After simulating normal ride height, the lower mounting bolt should be tightened, the wheel and lug nuts should be installed, and the vehicle should be lowered and the lug nuts tightened. On 2014 and earlier models, the shock absorber upper mounting nuts should also be tightened. Finally, the trim panels in the trunk should be reinstalled.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the old shock for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Remove the shock through the bottom of the spring and inspect all parts for damage. Install the parts on the new shock in the correct order. Install the washer and damper shaft nut, tightening it while holding the damper shaft with a wrench.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after removing the shock absorber upper mounting bolts for the 2014 Dodge Avenger? Posted by Customer
    A:
    After removing the shock absorber upper mounting bolts, the shock absorber assembly should be removed from the vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do if you notice signs of wear on the struts or coil springs for the 2008 Dodge Avenger? Posted by Customer
    A:
    Before starting any work, it is recommended to explore all options. The strut body cannot be serviced and must be replaced if there is a problem. However, complete strut assemblies with springs may be available on an exchange basis, which can save time and effort. It is important to check the cost and availability of parts before disassembling the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4766062AB, the Right Choice

To ensure reliability, purchase Mopar part # 4766062AB Front Coil Spring. It is sometimes referred to as Mopar Coil Springs. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4766062AB Front Coil Spring. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly