Mopar 5006736AA Front Coil Spring

You can Select Your Vehicle to check if 5006736AA fits your vehicle.

Check the cost and availability of parts.

Mount the strut clevis bracket portion of the strut assembly in a vise and mark the components for reassembly. Then, install the spring compressor on the spring and compress it sufficiently to relieve all pressure from the upper mount. While holding the damper shaft from turning, loosen the shaft nut with a socket. Remove the nut and upper mount. Inspect the pivot bearing for smooth operation. Carefully lift the compressed spring from the assembly. Remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft. Check the lower spring isolator for cracking and hardness; replace it if necessary.

Pump it in and out several times, checking for smooth action without binding or dead spots. Look for fluid leakage and replace the shock if necessary.