Mopar 5006756AA Front Coil Spring

You can Select Your Vehicle to check if 5006756AA fits your vehicle.

Ensure they are seated properly and carefully raise the axle back into position with the jack. Hold the shock in position and install the bolts, tightening the upper bolt.

Mount the strut clevis bracket portion of the strut assembly in a vise and mark the components for reassembly. Then, install the spring compressor on the spring and compress it sufficiently to relieve all pressure from the upper mount. While holding the damper shaft from turning, loosen the shaft nut with a socket. Remove the nut and upper mount. Inspect the pivot bearing for smooth operation. Carefully lift the compressed spring from the assembly. Remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft. Check the lower spring isolator for cracking and hardness; replace it if necessary.

Spring compressors are available on a daily rental basis at most auto parts stores or equipment rental yards.