Make sure this part fits

Mopar 5171995AA Front Coil Spring

2007-2011 Mopar 5171995AA

Customer Questions & Expert Answers (7)
Mopar 5171995AA Front Coil Spring
  • Part Description
    Spring-Front Coil
  • Replaces
    5171995AB
  • Manufacturer
    Mopar
Make sure this part fits
$67.32 MSRP: $85.70
You Save: $18.38 (22%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5171995AA
    Part DescriptionSpring-Front Coil
    Other NamesSpring
    Item Dimensions14.6 x 6.6 x 6.7 inches
    Item Weight6.60 Pounds
    ConditionNew
    Replaces5171995AB
    ManufacturerMopar
    SKU5171995AA
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2007-2011 Dodge Avenger4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6LExpress, Heat, LUX, Mainstreet, R/T AWD, R/T FWD, SE, SXT
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5171995AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you disassemble the strut and spring assembly for the 2008 Chrysler Sebring? Posted by Customer
    A:
    To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the shock absorber upper bolts be tightened on the 2007 Chrysler Sebring? Posted by Customer
    A:
    On 2015 and later models, the shock absorber upper bolts should be tightened.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you disassemble the strut and spring assembly for the 2013 Dodge Avenger? Posted by Customer
    A:
    To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after releasing tension from the spring for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Install the shock absorber/coil spring assembly.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after removing the old shock for the 2011 Dodge Avenger? Posted by Customer
    A:
    Remove the shock through the bottom of the spring and inspect all parts for damage. Install the parts on the new shock in the correct order. Install the washer and damper shaft nut, tightening it while holding the damper shaft with a wrench.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the shock absorber upper mounting bolts for the 2011 Dodge Avenger? Posted by Customer
    A:
    After removing the shock absorber upper mounting bolts, the shock absorber assembly should be removed from the vehicle.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5171995AA, the Right Choice

To ensure reliability, purchase Mopar part # 5171995AA Front Coil Spring. It is sometimes referred to as Mopar Coil Springs. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5171995AA Front Coil Spring. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly